What can I do if the battery of my car runs down and wont start? It maybe possible to happen for most drivers, especially their cars have been driven for several years. Here are some solutions we give for you to how to jump start you car dead battery in short time.
The First One: Jumper Cables
People mostly like to use jumper leads as a car emergency tool to jump start their cars because they are cheap and easy to store. 10 to 20 feet jumper cables are easy to buy in the market, but something need to be considered when you choose a jumper cable.
Longer cables are very convenient for you to not move the functioning car if far from yours, while it will lose power when current transmit along the longer cables to power up to your car.
The gauge of the cable decide the thickness of jumper cable, the thicker the cable is, the stronger the power is.
Jumper clamp should be stronger to take instant high temperature and big current.
How jumper cable to start you car?
1. please connect red jumper leads to the positive battery terminal of dead battery. And the other red end to attach to positive battery terminal of functioning car battery.
2. Please connect black jumper cable to negative battery terminal of the live car, and the other black end is to connect the metal part around dead battery, which will help you to have a safe jump.
The Second One: Jump Starters
Comparing to the lead acid battery jump starter, portable lithium battery jump starter is easy to use and multifunctional to charge different electronic devices. That’s why It get much more popular in the market. All in one jump starters help you to save cost to buy a light torch, a power bank, a compass, a laptop charger. Of course the more function, the more expensive. So you can decide to buy it on your budget. It will be wise to choose a jumper leads If you have mobile power bank, but it will be economic to buy a jump starter if you don’t have one, jump start a car and power up to your phone, laptop, or tablet.
If you have a car jumper in hand, just a few steps to get your car back on the road:
1. Please connect the plug to jump starter 12V;
2. Please connect red clamp of jump cable to car battery positive pole"+", and connect black clamp to car dead battery negative pole"-" or the metal part around car battery;
3. Please go into car and start your engine;
4. Please remove plug from your jump starter
5. Please remove the clamps from the car battery, please keep it in mind, many people always forgot disconnect jump starter from car battery, which will damage it for a long time.
Please don’t keep it in the car, especially in the summer. If the car is exposed in the sun, the temperature will get higher and higher, and jump starter maybe catch fire. No matter you use it or keep it, please follow the manual to do it in proper way.
The Carku 1100A Lifepo4 Jump Starters JS-318
The Carku JS-318 is a portable 1100A lifepo4 battery jump starter pack that delivers 225Wh for using electronics,and it starts a dead battery in seconds.Designed for a car, boat, motorcycle, RV and more with 12V 6.0L gasoline or 3.0L diesel car in seconds with the JS-318.Our best battery charger jump starter ever. Featuring high-discharge lifepo4 technology for safe operation in any circumstance.An AC inverter output is the best charging to support the charging of equipment below 120W by connecting the inverter. It features 3W LED lighting modes—standard, strobe, and SOS—for versatile outdoor emergency use.And an ultra-compact and lightweight design weighing just 4.6 pounds. Learning more from the JS-318 jump starter review.
Is the carku 1100A jump starter good for jump start your car?
If the battery is completely dead, then an 800 amp jump starter still may not be enough to jump start the vehicle. It is better to have more than you need when jump starting the vehicle. When jumping a car, which cable goes on first? We'll hook our positive cable onto. The positive see the red cable mixed with the red. One. We'll hook our negative cable onto the negative battery terminal.How jumper cable to start you car? The step 1 please connect red jumper leads to the positive battery terminal of dead battery. And the other red end to attach to positive battery terminal of functioning car battery.The step 2 Please connect black jumper cable to negative battery terminal of the live car, and the other black end is to connect the metal part around dead battery, which will help you to have a safe jump.
You Might Also Like Related Information:
How to choose a best car jump starter?
Top Rated Best Car Jump Starter
Jump Starter ODM/OEM Solutions
Portable Power Station ODM/OEM Solutions
Starting Battery ODM/OEM Solutions
ABOUT CARKU
STRENGTH FACTORY
THE DEVELOPMENT HISTORY OF CARKU
CORE COMPETITIVENESS
COMPANY CULTURE
QUALIFICATION
CARKU News
CARKU Exhibitions
CARKU Battery Applications
FREE QUOTE
