1200A peak current jump starter power pack is a professional emergency tool to start petrol and diesel vehicles. Compact lightweight 12V jump starter is ultra safe as various power source for petrol car, diesel truck, mid size SUV, mower, boats, ect, and for mobile electronics, smart phone, bluetooth, speaker, portable fan,MP3/4,camera,tablet PC.
Jump Start Vehicles
Insufficient battery；Battery aging；Low temperature and severe cold
30000mAh / 111Wh
Types of Cars
Motorcycle,Yacht,Pickup Truck,Min Bus,SUV,Car,Tractor,Cleaning Car,Forklift,Off-road Vehicle,Agricultural Machinery,Excavator,Crane Truck,Bus,Truck.
Dual Quick PD30W charge(5V/2.4A, 9V/2A, 12V/1.5A)
-40℃～60℃，Jump Start at Low Temperature
1W LED light
Gasoline Car 12V
For All 12V Car
12V Car Jump Start
Diesel Car 12V
For All 12V Car
Quick charge PD30W(5V/2.4A, 9V/2A, 12V/1.5A)
Gasoline Car 24V
Safety Design Ten Protections
Short-Circuit Protection;Over-Temperature Protection;Over-Charge Protection;Over-Discharge Protection;Over-Current Protection Protect;Over-Voltage Protection;Reverse Polarity Protection;Reverse-Charge Protection;Ultimate Low Electricity Consumption Protection;AI Software Protection.
CHARGING XX%Shows up the percentage of being charged when it is connected to 230V power supply
Shows up the amount of internal battery capacity. At least 60% are recommended to jump start a car.
LOW BATTERY RECHARGE NOWIndicates low battery, please recharge.
LIGHTThe steady light will show up after pressing the Light Switch once.
FLASHthe strobe light will come up after pressing the Light Switch twice.
SOSthe SOS warn light will show up after pressing the Light Switch three times.
USB1 USB2 ONUSB port 1 and 2 are available to recharge mobiel USB devices
Shows that the clamps are connected reversely. At this time the start is prevented. Please remove the clamps and connect them in the right way. The red clamp must be connected to the positive (+) terminal and the black clamp to the negative (-) terminal of the battery. If you are sure that the connections are correct but this warning still shows up, press the Power button for three seconds to ignore this warning.
SHORT CIRCUIT CHECK ALL CONNECTIONS__kindeditor_temp_url__It indicates a short circuit. At this time the start is prevented. Please remove the clamps and press the power button for three seconds before reconnecting the clamps to the battery.
12V JUMP START READYShows up when EPower-60 is connected to a 12V battery and is ready to jump start. If EPower-60 cannot detect the battery or the battery is too low to be detected, you may use the “Expert Mode” for manually choosing your 12V battery type and jump start your 12V car battery.
24V JUMP START READY
Shows up when EPower-60 is connected to a 24V battery and is ready to jump start. If EPower-60 cannot detect the battery or the battery is too low to be detected, you may use the “Expert Mode” for manually choosing your 24V battery type and jump start your 24V car battery.
* PU bag
* Car charger
* 3 in 1 USB cables
* Home Charger
* Smart jumper cable
1.Make sure the battery is not less than 60% shown on the LCD display.
2.Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the BALCK clamp to the vehicle's battery negative (-) terminal.
3.When you use EPower-60 jump start 12V car,it diaplays"12V JUMP START READY",when you use EPower-60 jump start 24V car,it diaplays"24V JUMP START READY".
4.Start the vehicle.
5.When the vehicle is restarted, please remove the jumper cable from Jump Starter and remove RED and BALCK clamps from the vehicle battery.
CARKU Product Wholesale Procurement Website
If you have any suggestion or consulting about CARDS, cool, you can leave a message here, we will reply you as soon as possible.